Arduino uno CNC Shield v3

EGP160

Out of stock

GRBL 0.8c compatible.
It has 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
It has 2 x End stops for each axis (hence, 6 in total)
Spindle enable and direction
Coolant enable
Uses removable PololuA4988compatible stepper drivers. (A4988, DRV8825 and others)
Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 microstepping)
Compact design.

GRBL 0.8c compatible. 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13) 2 x End stops for each axis (hence, 6 in total) Spindle enable and direction Coolant enable Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others) Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 microstepping) Compact design. Stepper Motors can be connected with 4 pin molex connectors. Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.).

Additional information

Weight	04 g
Dimensions	10 × 5 × 3 mm