MACH3 USB CNC 5 Axis 100KHz Smooth Stepper Motion Control card breakout board+TB6600 4 Axis 4.5A Stepper Motor Driver board

• 1 x  mach3 5 Axis STB5100 USB motion card
• 1 x TB6600-T4 4 Axis stepper motor driver board
• 4 x signal cables
• 1 x USB cable(With two magnetic shield)
• 1 x CD(Include Instructions, wiring diagrams, software, configuration files, etc.)

STB5100 5-axis mach3 USB controller card, suitable for all versions of mach3 software, support for all versions of Windows operating system, easy to use, very suitable for the users that using mach3 software to make engraving machine.

TB6600-T4 4 axis driver board, the biggest advantage is that it can connect the parallel interface board and also can connect the USB interface board to meet the customer's needs. Using the Toshiba TB6600HG driver chip, the maximum output of 4.5A current, current stepless adjustable, 4 stepper motors can be driven at the same time, suitable for NEMA17, NEMA23 stepper motor, has a 12Vpower supply,can be used for MACH3 interface board or CNC controller; have large driver current, smooth running, quiet small volume, convenient installation, high cost performance, It is suitable for making CNC machines and other automation equipment.

STB5100 control card's features:

1. Support for Windows XP, Windows 7 32/64bit, Windows8, Windows10 operating system;

2. Applicable to all versions of mach3 software;

3. Support for CNC controlled 5-Axis, can connect five stepper motor driver or servo driver;

4. The maximum output pulse frequency is 100KHz, and the pulse width can automatically change with the pulse frequency, which can be applicable to the closed-loop driver of strict requirements on pulse；

5. Five optocoupler isolation input signal interfaces: limit switch, emergency stop switch, auto tool zero sensor, home switch, NPN sensor switch can be connected;

6. Inverter control signal interface (optocoupler isolation): Output 0-10V speed control signal, PWM speed control signal, spindle start control signal, used for mach3 software to control spindle's speed, start and stop;

7. Four universal output signal interfaces, the maximum output 500MA current, can drive relays, solenoid valves, used to control mist, pumps, cylinders and other equipments;

8. Support for external connect electronic hand wheel, use HDR15 interface to connect electronic hand wheel, used for manual control of machine tools;

9. Add the enable signal interface, can be used to control the driver enable signal;

10. The power of control card: voltage 12-24VDC, current more than 500MA.

Dimensions:

TB6600-T4 stepper motor driver board's features:

1.DC Power input type:+14V~40V；

2.Output current:0～4.5A，current stepless adjustable；

3.12V Power output : Maximum output 2A current, for CNC controller or Mach3 interface board power supply;

4.Automatic half current function: when the motor stops running, the standby current is automatically reduced to half of the working current to reduce the heat of the driver；

5.Mircostep: 1、2、4、8、16；

6. Automatic decay function: the chip adjusts the current decay mode according to the motor parameters and running speed to reduce the noise of the driver.

7.Protect form : Overheated protection, over-current protection

8.The maximum pulse rate is 200KHZ.

9.Using the PWM chopper - type single - chip bipolar sinusoidal Micro - step current control mode

10. Dimensions: 192mm*88mm*34mm

11. Working environment: Temperature-15～50℃ Humidity<90%.

I/O Ports：

Typical Connection:

Installation Dimensions: